Horizontal Openwell Sumbersible Pumpsets
Description
Terco Horizontal Openwell Submersible Pumpsets are manufactured strict quality assurance for years of efcient and reliable operation. Following are some of the special features.Salient Features
- Pumpset are designed to withstand voltage drops to 320 volts.
- It has well designed sleeve and thrust bearing of adequate capacity for longer life. High operating efciencies of pumpset result into high water discharge rate and lower power bills.
- All components are precisely machined on modern precision machine tools to give you years of reliable operation.
- Stator and rotor of the monoset are vacuum impregnated with synthetic varnish and epoxy coated for corrosion resistance.
- All rotating components are dynamically balanced to ensure long bearing life and vibration free smooth operation.
- All pumpsets are fully tested prior to Packing.
Applications
- Irrigation from open wells especially where there is wide uctuation in water levels.
- Community water supply from open wells.
- Fountains
- Canals / Rivers belt irrigation.
- Water supply for high-rise building.
Material of Construction
- Motor Body : Cast Iron / Stainless Steel
- Stator : Vacuum Impregnated and epoxy coated for corrosion resistance. Thick end laminations are provided to protect motor windings.
- Rotor : Vacuum impregnated, shot blasted & coated with poly urethene colour for corrosion resistance & dynamically balanced for vibration free smooth operation.
- Winding : PVC/Polyester insulted, water cooled.
- Journal Bearings : Leaded Bronze and Stainless Steel, Water Lubricated, having high load bearing capacity.
- Thrust Bearings : Carbon Vs Stainless Steel and water lubricated to withstand high axial thrust loads.
- Pressure Equalizing Diaphragm : Adequately sized to accommodate expansion of water inside th motor and prevent loss cooling water
- Impeller : Graded Cast Iron & Dynamically balanced. Norel empellor Casing : High grade Cast Iron.
- Wear Rings : High quality abrasion resistance Bronze.
- Shaft : Stainless Steel of adequate diameter to ensure rigidity and ground to close tolerances. Cable Sealing Arrangement : Designed so that no borewell water with sand can enter the motor.
SINGLE PHASE OPENWELL SUMBERSIBLE PUMPSETS PERFORMANCE CHART AT 240V. 50 Hz. 2880 rpm
| SL No. | PUMP MODEL | MOTOR RATING kW / HP | PUMP SIZE (MM) SUC x DEL | 3 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | MAX CURR. (AMPS) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | S0525W | 0.37 / 0.5 | 25×25 | 92 | 92 | 57 | 23 | 58 | 38 | 5.5 | ||||||||
| 2. | SHINE50 | 0.37 / 0.5 | 25×25 | 92 | 92 | 57 | 23 | 58 | 38 | 5.5 | ||||||||
| 3. | SUPER100 | 0.75 / 1.0 | 25×25 | 166 | 166 | 161 | 148 | 130 | 108 | 70 | 60 | 7.5 | ||||||
| 4. | (SHINE)100 | 0.75 / 1.0 | 25×25 | 170 | 166 | 160 | 160 | 142 | 129 | 116 | 82 | 53 | 38 | 10.5 | ||||
| 5. | T1040W | 0.75 / 1.0 | 50×40 | 371 | 351 | 319 | 281 | 226 | 141 | 10.5 | ||||||||
| 6. | T1050W | 0.75 / 1.0 | 50×50 | 443 | 410 | 326 | 200 | 10.5 | ||||||||||
| 7. | T1532W | 1.1 / 1.5 | 32×25 | 161 | 161 | 160 | 157 | 151 | 162 | 131 | 117 | 101 | 82 | 62 | 40 | 15 | 13.5 | |
| 8. | T1540W | 1.1 / 1.5 | 40×40 | 173 | 173 | 172 | 170 | 166 | 160 | 149 | 135 | 117 | 94 | 63 | 13.5 | |||
| 9. | T2050W | 1.5 / 2.0 | 50×50 | 400 | 390 | 370 | 350 | 320 | 200 | 255 | 210 | 110 | 15.0 | |||||
| 10. | T2065W | 1.5 / 2.0 | 65×50 | 436 | 416 | 380 | 333 | 265 | 123 | 15.0 |
THREE PHASE OPENWELL SUBNERSIBLE PUMPSETS PERFORMANCE CHART AT 240V. 50 Hz. 2800 rpm
| SL No. | PUMP MODEL | MOTOR RATING kW / HP |
PUMP SIZE (MM) SUC x DEL |
3 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | MAX CURR. (AMPS) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | T3065W | 2.2 / 3.0 | 65×50 | 780 | 780 | 780 | 780 | 700 | 620 | 510 | 370 | 6.5 | ||||||
| 2. | T5065W | 3.7 / 5.0 | 65×50 | 985 | 985 | 985 | 985 | 985 | 800 | 790 | 685 | 540 | 370 | 130 | 10.0 | |||
| 3. | T5065W (HIGH HEAD) | 3.7 / 5.0 | 65×50 | 730 | 730 | 730 | 730 | 730 | 690 | 650 | 580 | 450 | 310 | 210 | 110 | 10.0 | ||
| 4. | T5075W | 3.7 / 5.0 | 75×65 | 1160 | 1160 | 1160 | 1160 | 1070 | 950 | 830 | 620 | 10.0 | ||||||
| 5. | T60XOV | 3.7 / 5.0 | 100×75 | 1295 | 1295 | 1295 | 1080 | 975 | 590 | 10.0 | ||||||||
| 6. | T7565W | 5.5 / 7.5 | 65×50 | 1040 | 1040 | 1040 | 1040 | 1040 | 1040 | 1040 | 970 | 900 | 810 | 570 | 15.0 | |||
| 7. | T7575W | 5.5 / 7.5 | 75×65 | 1380 | 1380 | 1380 | 1380 | 1380 | 1110 | 930 | 600 | 360 | 14.5 | |||||
| 8. | T75XOW | 5.5 / 7.5 | 100×100 | 1590 | 1590 | 1590 | 1590 | 1590 | 1020 | 370 | 14.5 |
SINGLE PHASE VERTICAL OPENWELL SUBNERSIBLE PUMPSETS PERFORMANCE CHART AT 240V. 50 Hz. 2800 rpm
| SL No. | PUMP MODEL | MOTOR RATING kW / HP |
PUMP SIZE (MM) DELIVERY |
25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | MAX CURR. (AMPS) |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | TVG6S | 0.75 / 1.0 | 32 | 4460 | 4210 | 3960 | 3670 | 3380 | 3090 | 2770 | 2410 | 2080 | 1250 | 1080 | 9.0 |
SINGLE PHASECENTRIFUGAL JET PUMP PERFORMANCE CHART AT 240V. 50 Hz. 2800 rpm
| SL No. | PUMP MODEL | MOTOR RATING kW / HP |
PUMP SIZE (MM) SUC x DEL |
10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | MIN. BORE DIA (mm) | DEL HEAD (M) | MAX CURR. (AMPS) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | TJP51S | 0.37 / 0.5 | 32x25x25 | 1360 | 1250 | 900 | 680 | 100 | 12 | 5.5 | |||||||||
| 2. | TJP2S | 0.75 / 1.0 | 32x25x25 | 2260 | 2050 | 1550 | 1070 | 700 | 470 | 370 | 320 | 100 | 25 | 6.5 | |||||
| 3. | TJP2S | 0.75 / 1.0 | 32x25x25 | 2350 | 2050 | 1550 | 1070 | 700 | 470 | 370 | 320 | 100 | 25 | 6.5 |